Medical instrumentation is one of the aspects to take be care in the health sector, both for the treatment and diagnosis of any type of disease and the protection or decrease of having it.
In this sense, the steel cannula to suction liposuction, electro-epilation needles, syringes or stethoscope tubes from 0.4 to 0.9 mm are part of this necessary surgical instrumentation and must respect strict medical certificates and offer a large variety of options for each type of intervention.
– Frazier cannula. It has a metal suction and it is made of stainless steel, with calibres ranging from CH-8 (8FR) until CH-18 (18FR). It has a curvature designed to measure, this model has a distal edge end, also it is atraumatic and completely smooth. To ensure quick identification of the calibre it has another connector with international code.
– Yankauer cannula. This cannula is manufactured in malleable PVC, transparent, semi-rigid and non toxic in four different sizes, Micron CH-9 (9Fr), No. 1 CH-12 (12FR), No. 2 CH-18 (FR 18) and No. 3 CH-24 (24FR). It also has an atraumatic hole and two side passages, connection in definition as well as two options at the end that are, with or without digital suction control.
– Poole cannula. It has a high calibre for suction of deep fields in a safely and effectively way. It has multiple external holes to guarantee the maximum suction without trapping large internal tissues, with a special design to not obstruct the particles that were crossed in the outer sheath. It also has a malleable thermosensitive PVC to be adapted to the cavity without causing trauma and a connection in definition.
Thus, these aspiration cannulas for liposuction and drainage may be of different lengths of tube, different types and can be equipment for surgical aspiration or in multiple combinations. On the other hand, the tubes of walls offer an ideal cut-to-length, with tight tolerances of + 0.2 mm burr-free. These tubes ranges from 0.5 to 1 mm which will have an external thread and will get the suction machines, here is distinguished on the one hand the probe and on the other hand the thread into the machine. So the bulb tube has expansion at both ends to facilitate the connection without intermediate connectors. This also provides conicity on the expansions so as to allow adapting any part. Finally, the needles are made of stainless steel and can be of 0.5 or 1 mm and its rounded tip protects the surface of the follicular wall.